Techniek voor een duurzame toekomst: De nylon blog

Ontdek inzichten in de industrie, materiaalinnovaties en oplossingen op maat voor de sectoren Automotive, Electronics, Appliance en Industrial.

nylon conformal cooling injection molds 3d printed channels guide 4

Technische kunststoffen Spuitgietdelen

Injection Mold Cooling System Design: Layout, Balance and Validation

augustus 3, 2026

Injection Mold Cooling System Design: Layout, Balance and Validation Read Post »

nylon 4226 4

Technische kunststoffen Spuitgietdelen

Melt Temperature vs Mold Temperature in Injection Molding

augustus 3, 2026

Melt Temperature vs Mold Temperature in Injection Molding Read Post »

Procesregeling van de tegendruk bij spuitgieten met schroef-cilindermodel, manometer, kleurmengingsbellen en monsters met spreidingsdefecten

Technische kunststoffen Spuitgietdelen

Injection Pressure, Speed and Packing: How to Set a Stable Process

augustus 3, 2026

Injection Pressure, Speed and Packing: How to Set a Stable Process Read Post »

nylon 4226 0

Technische kunststoffen Spuitgietdelen

Injection Molding Process Parameters: Process Window and Setup Sheet

augustus 3, 2026

Injection Molding Process Parameters: Process Window and Setup Sheet Read Post »

Flow marks and jetting in injection molding shown at gate entry and along the flow front

Technische kunststoffen Spuitgietdelen

Flow Marks vs Jetting in Injection Molding: Diagnosis and Fixes

augustus 3, 2026

Flow Marks vs Jetting in Injection Molding: Diagnosis and Fixes Read Post »

Flash in injection molding showing parting-line flash and inspection gauge

Technische kunststoffen Spuitgietdelen

Flash in Injection Molding: Parting Line, Clamp and Packing Fixes

augustus 2, 2026

Flash in Injection Molding: Parting Line, Clamp and Packing Fixes Read Post »

Delamination in injection molding showing a lifted surface layer and polymer interface

Technische kunststoffen Spuitgietdelen

Delamination in Injection Molding: Causes and Corrective Actions

augustus 2, 2026

Delamination in Injection Molding: Causes and Corrective Actions Read Post »

Color streaks in injection molding showing mixed polymer color and molded housing

Technische kunststoffen Spuitgietdelen

Color Streaks in Injection Molding: Mixing and Contamination Fixes

augustus 2, 2026

Color Streaks in Injection Molding: Mixing and Contamination Fixes Read Post »

Burn marks in injection molding showing a molded housing and vented mold cavity

Technische kunststoffen Spuitgietdelen

Burn Marks in Injection Molding: Trapped Gas, Heat and Venting

augustus 2, 2026

Burn Marks in Injection Molding: Trapped Gas, Heat and Venting Read Post »